Skip to content

opsi.orgheader image

opsi.org
 
Views
Actions
WinstScripts >>

endpoint

Document Actions
last edited 3 months ago by sehlers
Qualified for opsi 3.4

Three scripts: install (setup.ins) and uninstall (delsub.ins and uninstall.ins)

********************************************************************
; Copyright (c) uib gmbh (www.uib.de)
; This sourcecode is owned by uib
; and published under the Terms of the General Public License.
; credits: http://www.opsi.org/credits/

[Initial]
requiredWinstVersion >= "4.8.6"
LogLevel=2
; Log Errors in Logfile but don't abort:
ExitOnError=false
; Show syntax errors in the script:
ScriptErrorMessages=on
; Dont trace step by step through the script:
TraceMode=off
; Let started programs run in front of the winst window
StayOnTop=false

[Aktionen]
DefVar $TEMP$
Set $TEMP$ = EnvVar("TEMP")
DefVar $LogDir$
Set $LogDir$ = "%SystemDrive%\tmp"
DefVar $ProductId$
DefVar $MinimumSpace$
DefVar $NewExe$
DefVar $InstallDir$
DefVar $ExitCode$
DefVar $LicenseRequired$
DefVar $LicenseKey$
DefVar $LicensePool$

; ----------------------------------------------------------------
; - Please edit the following values                             -
; ----------------------------------------------------------------
Set $ProductId$       = "endpoint-protection"
Set $MinimumSpace$    = "50 MB"
Set $InstallDir$      = "%ProgramFilesDir%\" + $ProductId$
Set $NewExe$          = $InstallDir$ + "\" + $ProductId$ + ".exe"
Set $LicenseRequired$ = "false"
Set $LicensePool$     = "p_" + $ProductId$
; ----------------------------------------------------------------

if not(HasMinimumSpace ("%SystemDrive%", $MinimumSpace$))
	LogError "Not enough space on %SystemDrive%, " + $MinimumSpace$ + " on drive %SystemDrive% needed for " + $ProductId$
	isFatalError
	; Stop process and set installation status to failed
else
	comment "Show product picture"
	ShowBitmap /3 "%ScriptPath%\" + $ProductId$ + ".png" $ProductId$
	
	if FileExists("%ScriptPath%\delsub.ins")
		comment "Start uninstall sub section"
		Sub "%ScriptPath%\delsub.ins"
	endif
	
	Message "Installing Symantec Endpoint Protection ..."
	
	if not ($LicenseRequired$ = "false")
		comment "Licensing required, reserve license and get license key"
		Sub_get_licensekey
	endif
	
	comment "Start setup program"
	Winbatch_install
	;Sub_check_exitcode
	
	comment "Test for installation success"
	
	; Test if software marked as installed in registry
	if (GetRegistryStringValue("[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\{2EFCC193-D915-4CCB-9201-31773A27BC06}] DisplayName") = "")
		logError "Fatal: After Installation [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\{2EFCC193-D915-4CCB-9201-31773A27BC06}] not found"
		isFatalError
	else
		comment "Successful Installation"
	endif

endif

[Winbatch_install]
"%ScriptPath%\setup.exe"

[Files_install]
; Example of recursively copying some files into the installation directory:
;
; copy -s "%ScriptPath%\files\*.*" "$InstallDir$"

[Registry_install]
; Example of setting some values of an registry key:
;
; openkey [HKEY_LOCAL_MACHINE\Software\$ProductId$]
; set "name1" = "some string value"
; set "name2" = REG_DWORD:0001
; set "name3" = REG_BINARY:00 af 99 cd

[LinkFolder_install]
; Example of deleting a folder from AllUsers startmenu:
;
; set_basefolder common_programs
; delete_subfolder $ProductId$
;
; Example of creating an shortcut to the installed exe in AllUsers startmenu:
;
; set_basefolder common_programs
; set_subfolder $ProductId$
;
; set_link
; 	name: $ProductId$
; 	target: $NewExe$
; 	parameters:
; 	working_dir: $InstallDir$
; 	icon_file:
; 	icon_index:
; end_link
;
; Example of creating an shortcut to the installed exe on AllUsers desktop:
;
; set_basefolder common_desktopdirectory
; set_subfolder ""
;
; set_link
; 	name: $ProductId$
; 	target: $NewExe$
; 	parameters: /some_param
; 	working_dir: $InstallDir$
; 	icon_file: $NewExe$
; 	icon_index: 2
; end_link

[Sub_get_licensekey]
if opsiLicenseManagementEnabled
	comment "License management is enabled and will be used"

	comment "Trying to get a license key"
	Set $LicenseKey$ = demandLicenseKey ($LicensePool$)
	; If there is an assignment of exactly one licensepool to the product the following call is possible:
	; Set $LicenseKey$ = demandLicenseKey ("", $ProductId$)
	;
	; If there is an assignment of a license pool to a windows software id, it is possible to use:
	; DefVar $WindowsSoftwareId$
	; $WindowsSoftwareId$ = "..."
	; Set $LicenseKey$ = demandLicenseKey ("", "", $WindowsSoftwareId$)
	
	DefVar $ServiceErrorClass$
	set $ServiceErrorClass$ = getLastServiceErrorClass
	comment "Error class: " + $ServiceErrorClass$
	
	if $ServiceErrorClass$ = "None"
		comment "Everything fine, we got the license key '" + $LicenseKey$ + "'"
	else
		if $ServiceErrorClass$ = "LicenseConfigurationError"
			LogError "Fatal: license configuration must be corrected"
			LogError getLastServiceErrorMessage
			isFatalError
		else 
			if $ServiceErrorClass$ = "LicenseMissingError"
				LogError "Fatal: required license is not supplied"
				isFatalError
			endif
		endif
	endif
else
	LogError "Fatal: license required, but license management not enabled"
	isFatalError
endif


[Sub_check_exitcode]
comment "Test for installation success via exit code"
set $ExitCode$ = getLastExitCode
; informations to exit codes see
; http://msdn.microsoft.com/en-us/library/aa372835(VS.85).aspx
; http://msdn.microsoft.com/en-us/library/aa368542.aspx
if ($ExitCode$ = "0")
	comment "Looks good: setup program gives exitcode zero"
else
	comment "Setup program gives a exitcode unequal zero: " + $ExitCode$
	if ($ExitCode$ = "1605")
		comment "ERROR_UNKNOWN_PRODUCT	1605	This action is only valid for products that are currently installed."
		comment "Uninstall of a not installed product failed - no problem"
	else
		if ($ExitCode$ = "1641")
			comment "looks good: setup program gives exitcode 1641"
			comment "ERROR_SUCCESS_REBOOT_INITIATED	1641	The installer has initiated a restart. This message is indicative of a success."
		else
			if ($ExitCode$ = "3010")
				comment "looks good: setup program gives exitcode 3010"
				comment "ERROR_SUCCESS_REBOOT_REQUIRED	3010	A restart is required to complete the install. This message is indicative of a success."
			else
				logError "Fatal: Setup program gives an unknown exitcode unequal zero: " + $ExitCode$
				isFatalError
			endif
		endif
	endif
endif

*********************************************************************
delsub.ins

*********************************************************************
; Copyright (c) uib gmbh (www.uib.de)
; This sourcecode is owned by uib gmbh
; and published under the Terms of the General Public License.
; credits: http://www.opsi.org/credits/

DefVar $MsiId$
Set $MsiId$ = '{2EFCC193-D915-4CCB-9201-31773A27BC06}'

Message "Uninstalling Symantec Endpoint Protection ..."

if not (GetRegistryStringValue("[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\" + $MsiId$ + "] DisplayName") = "")
	comment "MSI id " + $MsiId$ + " found in registry, starting msiexec to uninstall"
	Winbatch_uninstall_msi
	sub_check_exitcode
endif

comment "Delete files"
Files_uninstall

comment "Cleanup registry"
Registry_uninstall

comment "Delete program shortcuts"
LinkFolder_uninstall

[Winbatch_uninstall_msi]
msiexec /x $MsiId$ /qb! REBOOT=ReallySuppress

[Files_uninstall]
; Example for recursively deleting the installation directory (don't forget the trailing backslash):
;
; delete -sf "$InstallDir$\"

[Registry_uninstall]
; Example of deleting a registry key:
;
; deletekey [HKEY_LOCAL_MACHINE\Software\$ProductId$]

[LinkFolder_uninstall]
; Example of deleting a folder from AllUsers startmenu:
;
; set_basefolder common_programs
; delete_subfolder $ProductId$
;
; Example of deleting a shortcut from AllUsers desktop:
;
; set_basefolder common_desktopdirectory
; set_subfolder ""
; delete_element $ProductId$

[Sub_check_exitcode]
comment "Test for installation success via exit code"
set $ExitCode$ = getLastExitCode
; informations to exit codes see
; http://msdn.microsoft.com/en-us/library/aa372835(VS.85).aspx
; http://msdn.microsoft.com/en-us/library/aa368542.aspx
if ($ExitCode$ = "0")
	comment "Looks good: setup program gives exitcode zero"
else
	comment "Setup program gives a exitcode unequal zero: " + $ExitCode$
	if ($ExitCode$ = "1605")
		comment "ERROR_UNKNOWN_PRODUCT	1605	This action is only valid for products that are currently installed."
		comment "Uninstall of a not installed product failed - no problem"
	else
		if ($ExitCode$ = "1641")
			comment "looks good: setup program gives exitcode 1641"
			comment "ERROR_SUCCESS_REBOOT_INITIATED	1641	The installer has initiated a restart. This message is indicative of a success."
		else
			if ($ExitCode$ = "3010")
				comment "looks good: setup program gives exitcode 3010"
				comment "ERROR_SUCCESS_REBOOT_REQUIRED	3010	A restart is required to complete the install. This message is indicative of a success."
			else
				logError "Fatal: Setup program gives an unknown exitcode unequal zero: " + $ExitCode$
				isFatalError
			endif
		endif
	endif
endif

*********************************************************************
uninstall.ins

*********************************************************************
; Copyright (c) uib gmbh (www.uib.de)
; This sourcecode is owned by uib gmbh
; and published under the Terms of the General Public License.
; credits: http://www.opsi.org/credits/

[Initial]
requiredWinstVersion >= "4.8.6"
LogLevel=2
; Log Errors in Logfile but don't abort:
ExitOnError=false
; Show syntax errors in the script:
ScriptErrorMessages=on
; Dont trace step by step through the script:
TraceMode=off
; Let started programs run in front of the winst window
StayOnTop=false

[Aktionen]
DefVar $TEMP$
Set $TEMP$ = EnvVar("TEMP")
DefVar $LogDir$
Set $LogDir$ = "%SystemDrive%\tmp"
DefVar $ExitCode$
DefVar $ProductId$
DefVar $InstallDir$
DefVar $LicenseRequired$
DefVar $LicensePool$

; ----------------------------------------------------------------
; - Please edit the following values                             -
; ----------------------------------------------------------------
Set $ProductId$       = "endpoint-protection"
Set $InstallDir$      = "%ProgramFilesDir%\" + $ProductId$
Set $LicenseRequired$ = "false"
Set $LicensePool$     = "p_" + $ProductId$
; ----------------------------------------------------------------


comment "Show product picture"
ShowBitmap /3 "%ScriptPath%\" + $ProductId$ + ".png" $ProductId$

Message "Uninstalling Symantec Endpoint Protection ..."

if FileExists("%ScriptPath%\delsub.ins")
	comment "Start uninstall sub section"
	Sub "%ScriptPath%\delsub.ins"
endif

if not ($LicenseRequired$ = "false")
	comment "Licensing required, free license used"
	Sub_free_license
endif

[Sub_free_license]
if opsiLicenseManagementEnabled
	comment "License management is enabled and will be used"

	comment "Trying to free license used for the product"
	DefVar $result$
	Set $result$ = FreeLicense($LicensePool$)
	; If there is an assignment of a license pool to the product, it is possible to use
	; Set $result$ = FreeLicense("", $ProductId$)
	;
	; If there is an assignment of a license pool to a windows software id, it is possible to use
	; DefVar $WindowsSoftwareId$
	; $WindowsSoftwareId$ = "..."
	; set $result$ = FreeLicense("", "", $WindowsSoftwareId$)
else
	LogError "Error: licensing required, but license management not enabled"
	isFatalError
endif